Re-Registration Wizard - Enter Vehicle Information Step

Use the Enter Vehicle Information Step to confirm that the vehicle information listed for the re-registration is correct. If needed you can make changes to the vehicle information. The table following the panel example describes the data entry for this step in the Re-Registration Wizard.

Tips:

For general information about using wizards, see the Wizard - Introduction.
For more information about working with data in fields, see the Data Entry Guidelines.

Directions:

To display the Enter Vehicle Information Step in the Data Entry Panel:

1. Open the Re-Registration Wizard.

2. To navigate to the step that you want to maintain:

Click Enter Vehicle Information in the Steps Panel.
Or, click Next or click Back until the data that you want to maintain displays in the Data Entry Panel.

Data Entry Panel - Enter Vehicle Information Step Example:

Data Entry Panel - Enter Vehicle Information Step Prompts Tip: To see more information about a field, click the hyperlink for that field name.
Make	Displays the defined vehicle manufacturer for your review. REQUIRED
Model	Displays the defined model of vehicle being registered for your review.
Style	Displays the style of the vehicle being registered for your review. REQUIRED
Color 1	Displays the color of the vehicle that was assigned during the original registration for your review. REQUIRED
Color 2	Displays the second color, if applicable that was assigned during the original registration for your review. Tip: If you specify a second color for the vehicle, it prints on the MVR-3 form.
Axles	Displays the number of axles the vehicle has that was assigned during the original registration for your review. Note: Axles are mandatory for Class Codes AC, AF, AP, BU, CC, CL, CO, FM, WE, TL, TT and for class code TR: SPECIAL MOBILE EQUIPMENT CLASS A. For all other Class Codes, leave Axles blank.
Tires	Displays the number of wheels for the vehicle if applicable for your review.
Fuel	Displays the defined code for the type of fuel used by the vehicle for your review. REQUIRED
Trailer	To specify the type of trailer, if applicable, click a choice in the drop-down list.
Unit Number	Displays the number that identifies a specific vehicle for your review. Tip: The Unit Number is informational only and can be used to identify a specific vehicle in a fleet.
DOT Number	Displays the Department Of Transportation Number for the vehicle, if applicable. (up to 9 characters) Note: The DOT Number is required for certain vehicles. For more information, see DOT Number.
Net Weight	Displays the vehicle's net weight for your review. (6.0 numeric) Note: The Net Weight is mandatory for Class Code SE. It is optional for all other class codes, but should not print on the registration form.
Fleet	To indicate the vehicle is part of a fleet, click Yes in the drop-down list. Otherwise, click No. Note: If you click Yes, you should maintain a unit number for the vehicle.
Title Application Number	Enter the title application number for the vehicle. (up to 9 characters) REQUIRED
Title Application Number II	Enter the second title application number, if applicable. (up to 9 characters) Note: The second Title Application Number is required when ownership of a vehicle has transferred twice and two Title Applications must be processed (one from the first untitled owner(s) and one from the second untitled owner(s).
Previous Title Number	When entering a new registration for a used vehicle or when processing a title application, enter the previous title number. (up to 20 characters) Notes: Optional for vehicles older than 1981. Required for title applications.
Previous Title State	Enter the state code for the state of origin where the vehicle came from, if applicable. (2 characters)
	To display the previous step, click Back. Keyboard shortcut: [ALT + b]
	To display the next step, click Next or press [ENTER]. Keyboard shortcut: [ALT + n] Tip: Next is not active for the last step.
	To close the wizard without validating or saving the data, click Close.